« Distributor gear shims | Main | CCW rim specs »
April 27, 2006
Sealing the intake rocker studs
The plugs have always been a little oily, so in the quest to cure that, I'm sealing the intake rocker studs with Permatex Aviation Form-A-Gasket sealant liquid, also know as 3H.
With a firing order of 18436572, you can lash:
0 Deg, 1 TDC - 1, 2 & 8
180 Deg, 4 TDC - 8, 4 & 3
0, 6 TDC - 3, 6, & 5
180, 7 TDC - 5, 7, & 2
Tools needed: 7/32 allen key and 5/8" wrench for the Comp ProMagnum rockers, deep 11/16 socket for 7/16" rocker studs
Rocker Stud torque is 55-60 ft-lbs.
Posted by Z28tt at April 27, 2006 11:56 PM