« Air Compressor and shop fan are now installed! | Main | Watkins Glen »
September 13, 2006
Air Compressor hard lines
On the way down to Delaware to pick up a Southbend CL145B lathe, I stopped by Fred Breitweiser's, in NJ. He donated a spare roll of 1" Type K copper tubing to the garage fund. I attempted to give him some cash to support his random shed projects, but he's just going to hold my little MIG hostage instead! :) Spec's on the copper tubing are:
Cerro Type K (high pressure)
NSF 61
.065" wall / .995" ID / 1.125" OD
665 max psi @ 70 degF.
Temp Range -425 to +400 degF
I'll have 130" against the wall, a 130" drop along the ceiling line
I'll have a 6' rise to the rafters from the compressor, 350" along the ceiling, sloped down, and 130" along the workbench wall to the Harbor Freight air dryer/regulator and 50' 3/8" hose reel I picked up on the way back from Delaware.
Air Tank
3/4" NPT elbow Male-Female
3/4" female ball valve
3/4" male to 1/2" female NPT reducer
1/2" male NPT to 1/2" barb
1/2" hose
1/2 male NPT to 1/2" barb
Air dryer (1/2" female NPT inlet and 3/4" female outlet)
3/4" NPT male to 3/4" socket
3/4" tube
3/4" coupler
3/4" tube
1" to 3/4" reducer elbow
1" Copper Tubing
1" Elbow at ceiling
1" Tubing
Tee at ceiling ->
LegA
1" tubing - 66"
1" to 1/2" reducer
1/2" tubing
1/2" Socket End x Female Pipe bronze casting
Parker quick disconnect
LegB
1" Tubing - 130"
1" Elbow
1" Tubing - 130"
1" to 1/2" reducer elbow
1/2" pipe
1/2" Union
1/2" pipe - 3"
1/2" NPT Male
Air Filter/Regulator
1/4" NPT Barb fitting
3/8" hose
3/8" NPT Barb fitting
90 deg 3/8 NPT Male-Female elbow
Harbor Freight 3/8" 50' hose reel
3/8" NPT Parker B23 quick coupler female (B23 for 1/4" NPT right now)
tubing hangers
Air Cooler
Compressor
5/8" tube?
?
1/2" NPT to 3/8" barb fitting
3/8" hose
Summit Transmission Cooler w/ Barb Fittings
3/8" hose
1/2" NPT male to 3/8" barb fitting
3/4" male to 1/2" female reducer
Air Tank
Posted by Z28tt at September 13, 2006 7:58 PM