« Swap Meet Water Pump | Main | »
April 21, 2007
Brake pad wear
Before 2 days at Watkins Glen:
Rear:
PFC 90's 0413.90.13.04
.496, .471, .448, .405
Drivers Rotor .780"
Pass Rotor .485
Front:
Wilwood Polymatrix B - 15B-5939K (7420 w/ bridge bolt)
.800" thick - all (new)
C5 Rotors (new) 1.263" (drivers) and 1.265" (pass)
Wear: I'll update after watkins glen
Both front rotors cracked heavily in half at Watkins Glen.
Front Pad wear :
Pass inner: .690 at front and .602 at rear, .635 middle top and bottom
Pass outer: .638 front and .620 rear, .609 middle top and .640 middle bottom
Drivers inner: .638 front and .622 rear, .626 top middle and .642 bottom middle
Drivers outer:.722 front and .625 rear, .673 middle top and bottom
Posted by Z28tt at April 21, 2007 3:06 PM